Rush V-1000 Guia de Instalação descarregar pdf (Página 3)

VertX EVO V1000 Installation Guide

Introduction

HID’s VertX EVO open platform is flexible and scalable to permit economic and high performance access control

solutions for a wide range of applications. The VertX EVO V1000 interconnects through different sub-networks and

protocols to a standard TCP/IP network with the capability of a variety of applications.

For example, the VertX EVO Access Controllers are a cost-effective method for two-way communication using Ethernet

between a computer and a V1000. In addition, the VertX EVO V1000 communicates through a RS-232 serial port and

multi-drop RS-485 ports.

Parts List

Description Quantity

VertX EVO™ units (one of the following):

V1000 (Access Controller)

Note: Each VertX EVO controller has a plastic base and is covered with a plastic lid.

1 V1000 used with

any combination of

(up to 32) interface

panels.

- Lithium Battery 1

- Mounting screws 4

- 2.2K EOL resistors 8 ea V1000

- Quick Installation Guide 1

- Installation Wiring Diagram Example 1

Note: One or more VertX Interface panels are required when installing a VertX EVO V1000 controller.

Product Specifications

Description Specification

Power Supply 12-24VDC

Maximum Current at 12-24VDC per Unit 1 Amp

Average Operating Current at 12VDC 210mA

Operating Temperature Range 32°-120°F (0°- 49°C)

Humidity 5% to 85% non-condensing

SD Card Reserved for Future Use

USB Port Reserved for Future Use

Cable Specifications

Cable Type Length Specification

RS-485 * 4000 feet (1220 m) to host

Using Belden 3105A, 22AWG twisted pair, shielded 100 cable, or

equivalent.

Input Circuits * 500 feet (150 m)

2-conductor, shielded, using ALPHA 1292C (22AWG) or Alpha 2421C

(18AWG), or equivalent.

Output Circuits * 500 feet (150 m)

2-conductor, using ALPHA 1172C (22AWG) or Alpha 1897C (18AWG),

or equivalent.

Wiegand

500 feet (150 m) to reader ALPHA 1299C, 22AWG, 9-conductor, stranded, overall shield.

Fewer conductors needed if all control lines are not used.

Ethernet 328 feet (100 m) Cat5, Cat5E, and Cat6

Power Supply

12-24 VDC IN

---- Refer to your Power Supply Installation Guide.

* Minimum wire gauge depends on cable length and current requirements.

July

2011 Page 3 of 19

1 2 3 4 5 6 7 8 ... 18 19

Comentários a estes Manuais

Sem comentários

Rush V-1000 Guia de Instalação Página 3

Comentários a estes Manuais